Ice Dam Water Mitigation Near Me
Water trapped behind an ice dam backs up under shingles and soaks insulation, ceilings and walls. Crews remove wet materials and dry the structure, 24/7, even in freezing weather.
- Wet insulation removal
- Ceiling and wall drying
- Daily moisture readings
When Roof Ice Backs Water Into the House
An ice dam forms when heat from the home melts snow on the roof and the water refreezes at the cold edge. Melt water behind the dam backs up under shingles and finds its way into the attic and walls.
A roofer or insulation contractor deals with the roof and attic. The crew removes the wet insulation and drywall and dries the framing, even in freezing weather. Call Water Mitigation Response Team at (888) 664-3027, 24/7, when ice dam water is inside.
- Water at the start: Category 1 melt water
- Where it enters: Eaves, exterior walls, attic edges
- What gets wet: Insulation, drywall, framing, trim
- Dry-out length: Three to seven days, often in cold weather
Signs of Ice Dam Water Damage
- Ice ridges and long icicles along the eaves
- Ceiling stains along exterior walls
- Water dripping from lights or vents near the eaves
- Peeling paint at the top of exterior walls
- Wet or compressed attic insulation
- Damp stains on soffits or siding
Drying a House After an Ice Dam
-
Locate the wet areas
The technician inspects ceilings, wall tops and the attic edge with meters and a thermal camera.
-
Remove wet insulation
Soaked insulation and loose drywall are removed so the framing can dry.
-
Control the conditions
Dehumidifiers and heat-assisted drying work even when it is freezing outside, since cold air alone does not remove moisture.
-
Verify and log
Daily readings continue until materials meet the IICRC S500 goal, with photos and logs for the claim.
Call for Emergency Mitigation (888) 664-3027
What to Do Before the Crew Arrives
- Put buckets under drips and move furniture away.
- Turn off power to wet ceilings and light fixtures.
- Stay out from under any ceiling that sags.
- Keep the heat on to avoid frozen pipes.
- Photograph the ceilings, walls and the ice on the roof from the ground.
What to Expect From the Crew
-
Cold weather does not stop the dry-out
Drying equipment works inside heated space, so winter is no reason to wait.
-
Insulation is checked
Wet insulation holds water against framing. The crew removes what is soaked and flags what is damp.
-
Roof work stays separate
A roofer fixes the roof and a contractor handles attic insulation or ventilation, while the crew dries the house.
Ice Dam Water Mitigation Cost
Typical ice dam water damage costs about $1,200 to $5,000 to dry, and a leak that soaked several walls and the attic can pass $9,000. These are typical national ranges, not a quote.
- One ceiling or wall section: $1,200 to $3,000. Extraction, insulation removal and drying.
- Several rooms along eaves: $3,000 to $6,500. Adds drywall removal and more equipment.
- Attic and multiple walls: $6,500 to $11,000. Heavy insulation removal and drying.
What changes the price
- Length of eaves affected
- Insulation and drywall that must be removed
- How long melt water kept coming
- Attic access and ceiling height
For a rough number, try the water mitigation cost calculator.
Insurance Records for Ice Dam Water Mitigation
A deductible comes off the top of any payment. On a small loss the mitigation bill and the deductible can sit close together, so some owners get a written scope before deciding whether to file.
Coverage depends on your policy, so check with your own insurer.
Ice Dam Water Mitigation by City
Busy cities for this service. Every town has its own page.
Ice Dam Water Mitigation by State
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- Florida
- Georgia
- Hawaii
- Idaho
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- Virginia
- Washington
- Washington DC
- West Virginia
- Wisconsin
- Wyoming
Related Water Damage Services
-
Snowmelt Flooding Water Mitigation
Pump-out and drying after snowmelt, spring thaw or snow piled against the foundation floods a basement.
-
Groundwater Seepage Water Mitigation
Pump-out and drying when groundwater seeps through a basement floor, wall or floor-wall joint.
-
Window Well Flooding Water Mitigation
Pump-out and drying when a window well fills, leaks through the window or floods an egress opening.
-
Gutter and Downspout Overflow Water Mitigation
Pump-out and drying when gutter overflow or a downspout dumps roof water into a basement or wall.
-
Roof Leak Water Mitigation
Attic and ceiling drying when a roof, skylight or chimney leak soaks insulation and drywall.
-
Rain Intrusion Water Mitigation
Wall and floor drying when rain leaks through a window, door, siding or exterior wall.
Ice Dam Questions
Should the ice be chipped off the roof?
Roof work can be dangerous and can damage shingles. A roofer or ice dam removal contractor should handle it.
Who fixes the cause?
A roofer, insulation contractor or ventilation specialist addresses the roof and attic. The crew handles the water.
Can the dry-out happen in freezing weather?
Yes. Drying equipment works inside heated rooms and cavities.
Does insurance cover ice dam damage?
Coverage depends on the policy, so check with your own insurer. Sudden water damage is often covered, while roof wear and poor insulation usually are not.
How long does drying take?
Most losses dry in three to seven days, and longer when insulation and plaster are involved.
Who handles ice dam leaks at night?
Call Water Mitigation Response Team at (888) 664-3027, 24/7, and say which ceilings or walls are wet.
The National Weather Service posts winter weather safety pages covering snow and ice.
Ready.gov covers winter storms and ways to protect a home.
Standing water keeps moving into drywall, subfloor and insulation. The sooner extraction starts, the less has to come out.